MANUAL TRANSMISSION SYSTEM
PRECAUTION
NOTICE:
When working with FIPG material, observe the following:
S
Using a razor blade and gasket scraper, remove all the old packing (FIPG) material from the gas-
ket surfaces.
S
Thoroughly clean all components to remove any loose material.
S
Clean both sealing surfaces with a non−residue solvent.
S
Apply FIPG in a continuous line (width approximately 1 mm (0.04 in.)) along the sealing surface.
S
Parts must be assembled within 10 minutes of FIPG application. Otherwise, the packing materi-
al must be removed and reapplied.
MANUAL TRANSMISSION (RA60)
−
MANUAL TRANSMISSION SYSTEM
MT−1
MT0HM−01