Toyota Tundra 2005 Service - Repair - Maintenance page 2095

LU−14
LUBRICATION (2UZ−FE)
REASSEMBLY
1. INSTALL DRIVE AND DRIVEN ROTORS
(a) Place the drive and driven rotors into pump body with the
marks facing the pump body cover side.
B02612
(b) Install the pump body cover with the 10 screws.
Torque: 10 N·m (105 kgf·cm, 7 ft·lbf)
B02611
2. INSTALL RELIEF VALVE
(a) Insert the relief valve and compression spring into the oil
pump body hole.
(b) Install the plug.
Torque: 49 N·m (500 kgf·cm, 36 ft·lbf)
B02610
− OIL PUMP
LU08U−07