Toyota Tundra 2005 Service - Repair - Maintenance page 1979

SFI (2UZ−FE) − FUEL TANK AND LINE
INSTALLATION
1. INSTALL FUEL PUMP ASSEMBLY (See page SF−19)
2. INSTALL FUEL TANK ASSEMBLY
(a) Set up the fuel tank on the transmission jack.
(b) Operate the transmission jack and install the fuel tank.
(c) Install the 2 fuel tank bands with the 2 bolts.
Torque: 62 N·m (632 kgf·cm, 45 ft·lbf)
B17591
(d) Install the fuel pipe bracket to the body with the 2 nuts.
Torque: 20 N·m (204 kgf·cm, 15 ft·lbf)
3. CONNECT FUEL PUMP CONNECTOR
B17590
4. CONNECT FUEL MAIN TUBE AND RETURN TUBE
(See page SF−1)
B17589
5. CONNECT SPEED SENSOR WIRE
Connect the speed sensor wire to the fuel tank with the nut.
B17588
6. INSTALL CHARCOAL CANISTER ASSEMBLY
(a) Connect the pump module connector, vent hose and
purge line hose to the charcoal canister.
(b) Install the charcoal canister assembly with the 4 bolts.
Torque:14.7 N·m (150 kgf·cm, 11 ft·lbf)
B17587
SF−37
SF1Y3−01