Toyota Tundra 2005 Service - Repair - Maintenance page 2272

SST
MANUAL TRANSMISSION (RA60)
18.
Install a new gasket and the drain plug.
19.
Install a new gasket and the filler plug.
D14053
20.
Install the release fork support to the clutch housing.
D13917
21.
Using SST, install the back−up lamp switch.
D13915
− MANUAL TRANSMISSION ASSEMBLY
INSTALL DRAIN PLUG
Torque: 37 N·m (377 kgf·cm, 27 ft·lbf)
INSTALL FILLER PLUG
Torque: 37 N·m (377 kgf·cm, 27 ft·lbf)
INSTALL RELEASE FORK SUPPORT
Torque: 47 N·m (480 kgf·cm, 35 ft·lbf)
INSTALL BACK−UP LAMP SWITCH
SST 09817−16011
Torque: 44 N·m (449 kgf·cm, 32 ft·lbf)
MT−29