Toyota Tundra 2005 Service - Repair - Maintenance page 2301

MT−58
SST
Claw
Reverse Gear Hub Sleeve
Key Spring
MANUAL TRANSMISSION (RA60)
D13997
D13998
Groove
Shifting Key
Key Spring
Shifting Key
D13999
D14000
− COUNTER GEAR
(c) Using SST and a press, install the reverse gear spline.
SST 09309−37010
(d) Install the reverse synchronizer ring to the reverse gear
spline.
4. REASSEMBLE REVERSE GEAR
(a) Install the key spring and 2 shifting keys to the reverse
gear.
HINT:
S
Face the grooves on the shifting keys towards the reverse
gear.
S
Face the claws on the key spring towards the reverse
gear.
S
Make sure that the key spring is positioned as shown in
the illustration.
(b) Install the hub sleeve to the reverse gear.
5. INSTALL REVERSE GEAR
(a) Apply gear oil to the needle roller bearing and reverse
gear bearing inner race.
(b) Install the needle roller bearing and reverse gear bearing
inner race to the reverse gear.