Toyota Tundra 2005 Service - Repair - Maintenance page 2275

MT−32
Synchronizer Ring Set No.3
SST
MANUAL TRANSMISSION (RA60)
D13942
D13943
3rd Gear
D13944
D13945
D13946
− INPUT SHAFT
4. REMOVE 3RD GEAR
(a) Using a snap ring expander, remove the snap ring.
(b) Remove the 3rd gear thrust washer and pin.
(c) Remove the 3rd gear, synchronizer ring set No.3, needle
roller bearing and spacer.
5. REMOVE 4TH GEAR
(a) Using a snap ring expander, remove the snap ring.
(b) Using SST and a press, remove the clutch hub No.2, hub
sleeve, synchronizer ring and 4th gear.
SST 09950−00020
(c) Remove the needle roller bearing.