Toyota Tundra 2005 Service - Repair - Maintenance page 2084

SST
Front
LUBRICATION (2UZ−FE)
(d)
B07233
(e)
4.
(a)
3/4 Turn
(b)
Drain and refill
B07234
Dry fill
(c)
HINT:
Install the oil filler cap facing the direction as shown in the il-
lustration.
5.
6.
7.
B07235
− OIL AND FILTER
Tighten the oil filter by hand until the rubber gasket con-
tacts the seat of the filter mounting.
Using SST, give it an additional 3/4 turn to seat the filter.
SST 09228−07501
REFILL WITH ENGINE OIL
Clean and install the oil drain plug with a new gasket.
Torque: 39 N·m (400 kgf·cm, 29 ft·lbf)
Fill with fresh engine oil.
Capacity:
w/ Oil filter change
w/o Oil filter change
Reinstall the oil filler cap.
START ENGINE AND CHECK FOR ENGINE OIL
LEAKS
RECHECK ENGINE OIL LEVEL
w/ Oil filter change:
REINSTALL ENGINE UNDER COVER
6.2 liters (6.6 Us qts, 5.5 Imp. qts)
5.7 liters (6.0 Us qts, 5.0 Imp. qts)
7.1 liters (7.5 Us qts, 6.2 Imp. qts)
LU−3