Toyota Tundra 2005 Service - Repair - Maintenance page 2276

SST
Clutch Hub
Spring
Synchromesh
Ball
Shifting Key
MANUAL TRANSMISSION (RA60)
6.
(a)
D13947
(b)
D13948
7.
Remove the clutch hub, 3 synchromesh shifting keys, 3 balls
and 3 springs from the hub sleeve.
HINT:
S
S
Hub Sleeve
D13949
− INPUT SHAFT
REMOVE INPUT SHAFT BEARING
Using 2 screwdrivers and a hammer, remove the snap
ring.
Using SST and a press, remove the input shaft bearing.
SST 09950−00020
REMOVE CLUTCH HUB NO.2 AND NO.3
Be careful not to scatter the balls or springs.
Use the same procedures to remove the clutch hub No.2
and No.3.
MT−33