Toyota Tundra 2005 Service - Repair - Maintenance page 2854

SUPPLEMENTAL RESTRAINT SYSTEM
SST
SST
Battery
SST
10 m (33 ft) or more
-
1. AIRBAG DEPLOYMENT WHEN SCRAPPING VE-
HICLE
(a) Check the function of the SST (see step 1-(a) on page
Battery
RS-25
SST
(b) Precaution (see page
(c) Disconnect the cable from the negative battery terminal.
Wait for 90 seconds after disconnecting the cable to prevent the
airbag working.
AB0158
(d) Remove the roof headlining (see page
BO-133
(e) Disconnect the curtain shield airbag connector.
NOTICE:
When handling the airbag connector, be careful not to dam-
age the airbag wire harness.
(f) Install the SST.
(1)
SST
NOTICE:
To avoid damaging the SST connector and wire harness,
do not lock the secondary lock of the twin lock.
H23222
(2)
(3)
NOTICE:
Take care not to damage the SST wire harness.
(4)
R13455
CURTAIN SHIELD AIRBAG ASSEMBLY
).
09082-00700
RS-1
).
Connect the connectors of the SST to the curtain
shield airbag assembly.
09082-00700, 09082-00760
Move the SST at least 10 m (33 ft) away from the ve-
hicle rear side window.
Maintaining enough clearance for the SST wire har-
ness in the rear side window, close all doors and
windows of the vehicle.
Connect the red clip of the SST to the battery posi-
tive (+) terminal and the black clip of the SST to the
negative (-) terminal.
Author :
RS-87
and RS-3 ).
BO-126 and
Date :
4502