Except
Double−Cab
model:
Matchmarks
PROPELLER SHAFT
Double−Cab
model:
Matchmarks
F19350
SST
R04164
−
PROPELLER SHAFT ASSEMBLY (2WD)
REMOVAL
REMOVE PROPELLER SHAFT
(a)
Place matchmarks on the differential and propeller shaft
flanges.
(b)
Except Double−Cab model:
Remove the 4 bolts, washers and nuts.
(c)
Double−Cab model:
Remove the 4 nuts and washers.
(d)
Remove the 2 mounting bolts and center support bearing
from the frame crossmember.
(e)
Pull out the propeller shaft yoke from the transmission.
(f)
Insert SST in the transmission to prevent oil leakage.
SST
09325−40010
PR−3
PR01H−05