Toyota Tundra 2005 Service - Repair - Maintenance page 2323

AUTOMATIC TRANSMISSION (A750E, A750F)
Shift
Shift
Solenoid
Solenoid
Valve SLU
Valve SL2
Shift
Solenoid
Valve SLT
Shift
Solenoid
Valve SL1
6.
(a)
(b)
D12705
7.
Shift
Solenoid
(a)
Valve SR
(b)
(c)
(d)
(e)
(f)
8.
(a)
(b)
(c)
(d)
Shift
(e)
Solenoid
Shift
Valve S2
Solenoid
(f)
Valve S1
D14229
(g)
9.
Pin
HINT:
Align the groove of the manual valve with the pin of the lever.
(a)
D12707
− VALVE BODY ASSEMBLY
REMOVE VALVE BODY
Remove the 19 bolts and the valve body.
Remove the 3 drum seal gaskets.
REMOVE SOLENOID VALVE
Remove the 2 bolts and the shift solenoid valve SR.
Remove the 3 bolts and the shift solenoid valves S1 and
S2.
Remove the 2 bolts, 2 solenoid lock plates and the 4
straight pins.
Remove the shift solenoid valves SL2 and SLU.
Remove the shift solenoid valves SL1 and SLT.
Remove the O−ring from the solenoid valve S2.
INSTALL SOLENOID VALVE
Install a new O−ring to the shift solenoid valve S2.
Install the shift solenoid valves SL1 and SLT.
Install the shift solenoid valves SL2 and SLU.
Install the 4 straight pins and the 2 solenoid lock plates
with the 2 bolts.
Torque: 6.4 N·m (65 kgf·cm, 57 in·lbf)
Install the shift solenoid valve S1 with the bolt.
Torque: 6.4 N·m (65 kgf·cm, 57 in·lbf)
Install the shift solenoid valve S2 with the bolt.
Torque: 10 N·m (102 kgf·cm, 7 ft·lbf)
Install the shift solenoid valve SR with the 2 bolts.
Torque: 6.4 N·m (65 kgf·cm, 57 in·lbf)
INSTALL VALVE BODY
Install 3 new drum seal gaskets to the transmission case.
AT−13