Toyota Tundra 2005 Service - Repair - Maintenance page 2744

Hide thumbs Also See for Tundra 2005:

Table of Contents

When using a vise, do not overtighten it.

IF NECESSARY, REPLACE OIL SEAL

Be careful not to damage the front housing.

Make sure to install the oil seal in the correct direction.

POWER STEERING VANE PUMP (2UZ-FE)

Using a screwdriver with vinyl tape wound around its tip,

remove the oil seal.

Coat a new oil seal lip with power steering fluid.

Using SST, press in the oil seal.

09950-60010 (09951-00330),

09950-70010 (09951-07100)