CLUTCH
−
CLUTCH RELEASE CYLINDER
REASSEMBLY
1.
INSTALL BLEEDER PLUG
Torque: 11 N·m (110 kgf·cm, 8 ft·lbf)
2.
COAT PISTON WITH LITHIUM SOAP BASE GLYCOL
GREASE, AS SHOWN
3.
INSTALL PISTON AND SPRING INTO CYLINDER
4.
INSTALL BOOT AND PUSH ROD
(a)
Install the push rod to the boot.
(b)
Install the boot with the push rod to the cylinder.
Z07291
CL−13
CL02G−11