Toyota Tundra 2005 Service - Repair - Maintenance page 1990

SF−48
SFI (2UZ−FE) − CAMSHAFT TIMING OIL CONTROL VALVE
REMOVAL
1. REMOVE THROTTLE BODY COVER
2. REMOVE INTAKE AIR CONNECTOR
3. REMOVE CAMSHAFT TIMING OIL CONTROL VALVE
(a) Disconnect the 2 camshaft oil control valve connectors.
(b) Remove the bolt, camshaft oil control valve and O−ring.
Torque: 7.5 N·m (76 kgf·cm, 66 in.·lbf)
(c) Remove the O−ring from the each camshaft oil control
valve.
HINT:
At the time of installation, please refer to the following items.
Use a new O−rings.
B01688
SF1XK−01