Toyota Tundra 2005 Service - Repair - Maintenance page 2305

MT−62
MANUAL TRANSMISSION (RA60)
DISASSEMBLY
1.
Remove the 2 bolts and shift fork No.2 and No.3.
D14004
2.
Remove the shift fork shaft No.3, ball, spring, interlock pin No.2
and interlock pin No.3.
D14007
3.
Remove the shift fork shaft No.2, ball, spring, interlock pin No.2
and interlock pin No.3.
D14008
4.
(a)
D14009
(b)
D14010
− CONTROL SHAFT ASSEMBLY
REMOVE SHIFT FORK NO.2 AND NO.3
REMOVE SHIFT FORK SHAFT NO.3
REMOVE SHIFT FORK SHAFT NO.2
REMOVE SHIFT HEAD NO.1
Using a pin punch (5 mm (0.20 in.)) and hammer, tap out
the slotted pin.
Remove the shift fork shaft No.1, ball, spring, shift head
No.1 and interlock pin No.1.
MT0I7−01