Toyota Tundra 2005 Service - Repair - Maintenance page 1988

SF−46
Ohmmeter
SFI (2UZ−FE) − CAMSHAFT TIMING OIL CONTROL VALVE
CAMSHAFT TIMING OIL CONTROL
VALVE
ON−VEHICLE INSPECTION
(a) Remove the throttle body cover.
(b) Remove the intake air connector.
(c) Disconnect the oil control valve connector.
(d) Using an ohmmeter, measure the resistance between the
terminals.
Resistance: 6.9 to 7.9 Ω at 20°C (68°F)
If the resistance is not as specified, replace the valve.
(e) Reconnect the oil control valve connector.
(f) Reinstall the intake air connector.
(g) Reinstall the throttle body cover.
B12806
SF0P8−03