ST−10
STARTING (1GR−FE)
−
(a)
Align the starter−commutator−rubber−end frame with the
convex cutout of starter yoke.
(b)
Install starter−commutator−end−frame to starter yoke
assy.
A23166
7.
INSTALL STARTER YOKE ASSY
(a)
Align the key of the starter yoke assy with the keyway of
starter drive housing.
A23167
(b)
Install the starter yoke assy with the 2 through bolts.
Torque: 6.0 N m (61 kgf cm, 53 in. lbf)
8.
INSTALL REPAIR SERVICE STARTER KIT
(a)
Apply grease to the plunger and hook.
A23151
(b)
Hang the plunger hook of the repair service starter kit to
the drive lever.
(c)
Install the plunger and return spring.
A23168
(d)
Install the repair service starter kit with the 2 screws.
Torque: 7.5 N m (76 kgf cm, 66 in. lbf)
A23150
STARTER (1.6 kW)