Toyota Tundra 2005 Service - Repair - Maintenance page 2270

Hide thumbs Also See for Tundra 2005:

Table of Contents

MANUAL TRANSMISSION (RA60)

MANUAL TRANSMISSION ASSEMBLY

INSTALL SPEEDOMETER DRIVE GEAR

Install the oil receiver pipe, ball and speedometer drive

Using a snap ring expander, install the snap ring.

INSTALL EXTENSION HOUSING

Apply FIPG to the extension housing as shown in the il-

Part No. 08826−00090, THREE BOND 1281 or equiva-

Install the extension housing and shift lever housing to

the rear case with the 8 bolts and clamp.

Torque: 29 N·m (296 kgf·cm, 21 ft·lbf)

Install the bolt to the shift lever housing.

Torque: 33 N·m (340 kgf·cm, 25 ft·lbf)