Toyota Tundra 2005 Service - Repair - Maintenance page 2370

TRANSFER
15. INSTALL EXTENSION HOUSING
HINT:
FIPG
Remove any FIPG material and be careful not to drop oil on the
contacting surface of the extension housing.
(a) Apply FIPG to the extension housing as shown in the il-
lustration.
FIPG:
Part No. 08826−00090,
THREE BOND 1281 or equivalent
F02019
(b) Apply sealant to the bolt threads.
Sealant:
Part No. 08833−00080, THREE BOND 1344, LOCTITE
242 or equivalent
(c) Install the extension housing with the 5 bolts.
Torque: 12 N·m (122 kgf·cm, 9 ft·lbf)
F07964
16. INSTALL FRONT COMPANION FLANGE
(a) Install the front companion flange to the input shaft.
(b) Using SST, hold the front companion flange, and install a
new front companion flange lock nut.
SST
SST
Torque: 118 N·m (1,203 kgf·cm, 87 ft·lbf)
(c) Stake the front companion flange lock nut.
17. INSTALL REAR COMPANION FLANGE
Install the rear companion flange in the same way as the front
Q07159
companion flange.
18. INSTALL OIL DEFLECTOR AND UPPER COVER
Install 2 new gaskets, oil deflector and upper cover with the 4
bolts.
Torque: 18 N·m (184 kgf·cm, 13 ft·lbf)
− TRANSFER ASSEMBLY
09330−00021
TR−21