Toyota Tundra 2005 Service - Repair - Maintenance page 2058

CO−14
COOLING (2UZ−FE) − RADIATOR
RADIATOR
ON−VEHICLE CLEANING
INSPECT FINS FOR BLOCKAGE
If fins are clogged, wash them with water or a steam cleaner and
dry with compressed air.
NOTICE:
S
If the distance between the steam cleaner and the
core is too close, there is a possibility of damaging
B14807
the fin, so keep the following injection distance.
Injection Pressure
2,942 to 4,903 kPa
(30 to 80 kgf·cm
4,903 to 7,845 kPa
(50 to 80 kgf·cm
S
If the fins are bent, straighten them with a screwdriver
or pliers.
S
Never apply water directly onto the electronic compo-
nents.
2
, 427 to 711 psi)
2
, 711 to 1,138 psi)
CO1C6−02
Injection Distance
300 mm (11.81 in.)
500 mm (19.69 in.)