Matchmarks
Matchmarks
SST
SST
PROPELLER SHAFT
−
DISASSEMBLY
NOTICE:
Be careful not to grip the propeller shaft tube too tightly in
a vise as this will cause deformation.
1.
Rear propeller shaft:
SEPARATE PROPELLER SHAFT AND INTERMEDI-
ATE SHAFT
(a)
Place matchmarks on the flanges.
R04445
(b)
Remove the 4 nuts, bolts and washers.
2.
Rear propeller shaft:
REMOVE CENTER SUPPORT BEARING FROM IN-
TERMEDIATE SHAFT
(a)
Using a hammer and chisel, loosen the staked part of the
nut.
(b)
Using SST to hold the flange, remove the nut and spacer.
SST
(c)
Place matchmarks on the flange and shaft.
Z04243
(d)
Using SST, remove the flange from the intermediate
shaft.
SST
(e)
Remove the spacer and center support bearing from the
intermediate shaft.
Q06613
PROPELLER SHAFT ASSEMBLY (4WD)
09330−00021
09950−30012 (09951−03010, 09953−03010,
09954−03010, 09955−03030, 09956−03020)
PR−11
PR05O−03