Toyota Tundra 2005 Service - Repair - Maintenance page 2383

Hide thumbs Also See for Tundra 2005:

Table of Contents

INSPECT PINION GEAR THRUST CLEARANCE

Using a feeler gauge, measure the planetary pinion gear thrust

Standard clearance:

0.11 to 0.84 mm (0.0043 to 0.0331 in.)

Maximum clearance:

0.84 mm (0.0331 in.)

If the clearance exceeds the maximum, replace the planetary

gear assembly.

INSPECT PLANETARY PINION GEAR RADIAL

Using a dial indicator, measure the planetary pinion gear radial

Standard clearance:

0.009 to 0.038 mm (0.0004 to 0.0015 in.)

Maximum clearance:

0.038 mm (0.0015 in.)

If the clearance exceeds the maximum, replace the planetary

gear assembly.

IF NECESSARY, REPLACE PLANETARY GEAR OUT-

Using a snap ring expander, remove the snap ring.

Using SST and a press, remove the bearing.

Using SST and a press, install a new bearing so that the

groove does not face the planetary gear assembly.

PLANETARY GEAR

09554−30011, 09555−55010

09223−15020, 09515−30010, 09950−70010

(09951−07100)