Toyota Tundra 2005 Service - Repair - Maintenance page 2150

(4) (2)
(3)
(1)
(5)
STARTING (1GR−FE)
DISASSEMBLY
1.
(a)
(b)
(c)
(d)
A23170
2.
(a)
A23171
(b)
A23172
(c)
Magnetic Finger
ST0948
3.
(a)
(b)
A23173
− STARTER (2.0 kW)
REMOVE STARTER YOKE ASSY
Remove the nut, and disconnect the lead wire from the C
terminal.
Remove the 2 through bolts.
Pull out the starter yoke and the armature together.
Remove the O−ring from the starter yoke.
REMOVE MAGNET STARTER SWITCH ASSY
Remove the 2 screws and magnet starter switch.
Remove these parts from the starter drive housing.
(1) Starter magnet switch return spring
(2) Starter idle gear pinion
(3) Starter idle gear clutch roller
(4) Starter idle gear retainer
(5) Starter clutch
Using a magnetic finger, remove the steel ball from the
clutch shaft hole.
REMOVE STARTER BRUSH HOLDER ASSY
Remove the 2 screws and end cover from the starter
yoke.
Remove the O−ring from the starter yoke.
ST−17
ST0PV−01