COOLING (2UZ−FE)
−
THERMOSTAT
REMOVAL
HINT:
Removal of the thermostat would have an adverse effect, caus-
ing a lowering of cooling efficiency. Do not remove the thermo-
stat, even if the engine tends to overheat.
1.
DRAIN ENGINE COOLANT
2.
DISCONNECT WATER INLET FROM WATER INLET
HOUSING
Remove the 3 nuts and disconnect the water inlet from the wa-
ter inlet housing.
3.
REMOVE THERMOSTAT
(a)
Remove the thermostat.
(b)
Remove the gasket from the thermostat.
B05866
CO−11
CO0IV−05