CL−16
Matchmarks
CLUTCH
−
CLUTCH UNIT
REMOVAL
1.
REMOVE TRANSMISSION FROM ENGINE
(See page MT−3)
2.
REMOVE CLUTCH COVER AND CLUTCH DISC
(a)
Put matchmarks on the flywheel and clutch cover.
(b)
Loosen each set bolt one turn at a time until spring tension
is released.
(c)
Remove the set bolts, and pull off the clutch cover with the
D13774
clutch disc.
NOTICE:
Do not drop the clutch disc.
3.
REMOVE BOOT, CLUTCH RELEASE BEARING AND
CLUTCH RELEASE FORK FROM TRANSMISSION
(a)
Remove the boot and release bearing together with the
fork.
(b)
Remove the clip from the release bearing.
D13775
CL02J−03