Ricoh M022 Service Manual page 51

2. Attach the correct paper tray number and size decals to the paper trays.
• Paper tray number and size decals are also used for the optional paper tray. Keep these decals
for use with these optional units.
Left Tray Setting for M024 and M028
For the finisher versions of the machine (M024 and M028), set the left tray [A] in the internal finisher [B].
Initialize the Developer
1. Plug in the machine.
2. Make sure that the platen or ARDF is closed and the main power is turned off.
3. Turn the main power switch on. The machine automatically starts the initialization procedure. The LED
turns blue when this procedure has finished.
4. Make copies of image samples (text, photo, and text/photo modes).
5. Do the Automatic Color Calibration process (ACC) for each mode (Copy mode, Printer 600 x 600
dpi, Printer 900 x 600 dpi, Printer 1800 x 600 dpi, and Printer 1200 x 1200 dpi) as follows:
• 1) Print the ACC test pattern (User tools > Maintenance > Printer Function > Execute > Print).
• 2) Put the printout on the exposure glass.
• 3) Put 10 sheets of white paper on top of the test chart.
• 4) Close the ARDF or the platen cover.
• 5) Press "Scan" on the LCD panel. The machine starts the ACC.
6. Check that the sample image has been copied normally.
7. Do the user's color registration procedure (press Color Registration on the display panel).
CÓPIA NÃO CONTROLADA
CÓPIA NÃO CONTROLADA
Copier Installation
2
49