Viewing The Switch Alarm Log - Motorola RFS Series Reference Manual

3-40 Motorola RF Switch System Reference

3.7 Viewing the Switch Alarm Log

Use the Alarm Log
for greater detail, delete alarms, acknowledge alarms or export alarm data to a user-specified location
for archive and network performance analysis.
To view switch alarm log information:
1. Select Switch
2. Use the Alarm Log screen's filtering options to view alarm log data by page or the by its entire content.
3. Select either of the two available options to view alarm log information:
View By Page
View All
4. Refer to the table within the
Index
Status
screen as an initial snapshot for alarm log information. Expand alarms (as needed)
> Alarm Log from the main menu tree.
Select the View By Page
page basis. Use the View By Page option to page through alarm logs. If there are
a large number of alarms, the user can navigate to the page that has been
completely loaded. All operations can be performed on the currently loaded data.
Enter a page number next to "Page" and click the
specific page.
Select the View All radio button to display the complete alarm log with in the
table. If there are a large number of alarms, the View All option will take several
minutes to load.
Alarm Log screen for the following information:
Displays the unique numerical identifier for trap events (alarms) generated in the
system. Use the index to help differentiate an alarm from others with similar
attributes.
Displays the current state of the requests made from the applet. Requests are any
"SET/GET" operation from the applet. The Status displays error messages if
something goes wrong in the transaction between the applet and the switch.
radio button to view alarm log information on a per
Go
button to move to the