Reviewing Found Probes - Motorola RFS Series Reference Manual

6-100 Motorola RF Switch System Reference Guide
Signal Strength
(dBm)
Heard Channel
Heard Time
4. Select the Clear Report

6.11.4 Reviewing Found Probes

Refer to the Probes Found
probe information collected during the AP's channel scan. The information displayed within the Probes Found
tab is read-only with no user configurable parameters.
To view the enhanced beacons table report:
1. Select Security
2. Select the Probes Found
3. Refer to the following information as displayed within the
Portal MAC
MU MAC
Signal Strength
(dBm)
CHeard hannel
Heard Time
4. Select the Clear Report
Displays the signal strength when the unadopted AP was detected.
Displays the channel frequency when the unadopted AP was detected.
Displays the time when the unadopted AP was detected.
button to clear the statistic counters and begin a new data calculation.
tab to view the enhanced Probe report created by the switch. The table displays
> Enhanced Probe/Beacon Table
tab.
Displays the MAC address of the unadopted MU picked detected by the Enhanced
Probes enabled AP.
Displays the MAC address of the Enhanced Probe detected MU.
Displays the signal strength when the unadopted MU was detected.
Displays the channel frequency used when the unadopted MU was detected.
Displays the time the unadopted MU was detected.
button to clear the statistic counters and begin a new data calculation.
from the main menu tree.
Probes Found tab.