Checking The Brake Pads For Wear; Adjusting The Throttle Cable - Ducati Monster S4RS Owner's Manual

Checking the brake pads for wear (fig. 45)
MIN
Front brake
The brake pads are marked with wear indicators so that
they can be checked without removing them from the
calipers. If the grooves in the pad friction material are still
visible, the pad is still in good condition.
E
Rear brake
The thickness of the friction material on each pad must be
at least 1 mm.
Important
Have the brake pads replaced at a Ducati Dealer or
Authorized Workshop.
1 mm
fig. 45

Adjusting the throttle cable

In all handlebar positions, the throttle twistgrip should
➤
1
have free play of 2 to 4 mm measured in terms of rotation
of the outer circumference of the twistgrip. If necessary,
adjust the freeplay with the adjuster (1, fig. 46) located on
the twistgrip itself.
fig. 46
49