Checking The Brake Pads For Wear; Adjusting The Throttle Cable - Ducati MONSTER S4R S Use And Maintenance Manual

Checking the brake pads for wear

Front brake
The brake pads are marked with wear indicators so that
they can be checked without removing them from the
calipers. If the grooves in the pad friction material are still
visible, the pad is still in good condition.
Rear brake
The thickness of the friction material on each pad must be
at least 1 mm.
Important
Have the brake pads replaced at a Ducati Dealer or
Authorized Service Centre.

Adjusting the throttle cable

In all steering positions, the throttle twistgrip should have
about 2 – 4 mm of free travel, measured at the outer edge
of the twistgrip housing. If necessary, adjust the play with
the adjuster (1, fig. 50) located on the twistgrip itself.
(fig. 49)
MIN
1
E
1 mm
fig. 49
➤
➤
fig. 50
53