Subaru 2009 IMPREZA Service Manual page 2722

Sunload Sensor (Auto A/C Model)
HVAC SYSTEM (HEATER, VENTILATOR AND A/C)
22.Sunload Sensor
(Auto A/C Model)
A: REMOVAL
1) Disconnect the ground cable from battery.
2) Remove the audio. <Ref. to ET-6, REMOVAL,
Audio.>
3) Push out the sunload sensor from the back side
of the instrument panel.
AC-01872
4) Disconnect the harness connector and remove
the sunload sensor.
CAUTION:
Be careful not to damage the interior trims
when removing the sensor.
B: INSTALLATION
Install in the reverse order of removal.
C: INSPECTION
Refer to "Sunload Sensor" of HVAC SYSTEM (AU-
TO A/C) (DIAGNOSTICS). <Ref. to AC(diag)-34,
SUNLOAD SENSOR, Diagnostic Procedure for
Sensors.>
AC-42