Mazda RX-8 Workshop Manual page 2066

STEP
1 Does the vehicle creep when
selector lever is moved slightly
in N position?
2 Inspect following solenoid.
(See
INSPECTION
Are these solenoids normal?
3 Verify test results.
< Previous Next >
INSPECTION
SOLENOID VALVE
[SJ6A-EL].)
Shift solenoid
B
Shift solenoid
C
Shift solenoid
E
Shift solenoid
G
If normal, return to the diagnostic index to service any additional
symptoms.
If malfunction remains, inspect the related Service Bulletins and/or
On-line Repair Information and perform repair or diagnosis.
If the vehicle is repaired, troubleshooting
completed.
If the vehicle is not repaired or additional diagnostic
information is not available, replace the TCM.
© 2010 Mazda North American Operations, U.S.A.
YesGo to the next step.
No Inspect and adjust the selector lever and TR
switch.
(See SELECTOR LEVER
(See TRANSMISSION RANGE (TR) SWITCH
INSPECTION [SJ6A-EL].)
(See TRANSMISSION RANGE (TR) SWITCH
ADJUSTMENT [SJ6A-EL].)
YesOverhaul the transmission and repair or replace
any malfunctioning parts. (clutch slippage, worn)
(See Automatic Transmission Workshop Manual
SJ6A-EL.)
No Inspect the coupler component.
If normal, replace the malfunctioning parts.
(See Automatic Transmission Workshop Manual
SJ6A-EL.)
ACTION
INSPECTION.)
Back to Top