Mazda RX-8 Workshop Manual page 2131

2 Access the following PCM
PIDs using the M-MDS.
Are PIDs value normal?
3 Stop the engine.
Inspect line pressure control
solenoid.
(See SOLENOID VALVE
INSPECTION
Is the normal?
4 Verify test results.
flares up or
slips during
acceleration
Engine
flares up or
slips when
shifting
RPM
APP
ECT
[SJ6A-EL].)
If normal, return to the diagnostic index to service any additional
symptoms.
If malfunction remains, inspect the related Service Bulletins and/or
On-line Repair Information and perform repair or diagnosis.
No Go to the next step.
YesGo to the next step.
No Inspect and repair suspected PID related part.
YesInspect the ATF condition.
If large amount of metal specks are
found, overhaul the transmission
and repair or replace any
malfunctioning parts.
(See Automatic Transmission
Workshop Manual SJ6A-EL.)
If a large amount of metal specks
are not found, replace the control
valve body.
(See CONTROL VALVE BODY
REMOVAL
(See CONTROL VALVE BODY
INSTALLATION
No Inspect the coupler component.
If normal, replace the malfunctioning parts.
(See Automatic Transmission Workshop Manual
SJ6A-EL.)
[SJ6A-EL].)
[SJ6A-EL].)