Vlan Max-Age - Dell Force10 S4810P Reference Manual

Version 7.5.1.0
Version 6.2.1.1
Related
vlan bridge-priority
Commands
vlan forward-delay

vlan max-age

show spanning-tree pvst
vlan max-age
Set the time interval for the PVST+ bridge to maintain configuration information before refreshing that information.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax vlan vlan-range max-age seconds
To return to the default, use the no vlan max-age command.
Parameters
vlan
max-age
Defaults 20 seconds
Command Modes CONFIGURATION (conf-pvst)
Command History
Version 8.3.11.1
Version 8.3.7.0
Version 7.6.1.0
Version 7.5.1.0
Version 6.2.1.1
Related
vlan bridge-priority
Commands
vlan forward-delay
vlan hello-time
show spanning-tree pvst
Introduced on the C-Series.
Introduced.
– sets the bridge-priority value.
– changes the time interval before FTOS transitions to the forwarding state.
– changes the time interval before PVST+ refreshes.
– displays the PVST+ configuration.
vlan-range
Enter the keyword vlan followed by the VLAN number(s). The range
is 1 to 4094.
seconds
Enter the keywords max-age followed by the time interval, in
seconds, that FTOS waits before refreshing configuration information.
The range is 6 to 40 seconds. The default is 20 seconds.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced.
– sets the bridge-priority value.
– changes the time interval before FTOS transitions to the forwarding state.
– changes the time interval between BPDUs.
– displays the PVST+ configuration.
1299