Modifying An Event Action Definition; Deleting An Event Action Definition; Configuring Event Actions For Snort Messages - Brocade Communications Systems WFT-2D User Manual

5. Change the description of the definition, if needed. You can perform this action in any of the
6. Click Finish to save the new definition.

Modifying an event action definition

CAUTION
Use caution when you modify an event action. Saving changes to an event action definition resets
the runtime information for the events in the definition.
To modify an existing event action definition, complete the following steps.
1. Select Monitor > Event Processing > Event Actions.
2. Select the definition that you want to edit from the Event Actions list.
3. Click Edit to display the Edit Event Action dialog box.
4. Make the changes you want to make to the definition. You can perform this action in any of the
5. Click Finish to save your definition.

Deleting an event action definition

To delete an event action definition, complete the following steps.
1. Select Monitor > Event Processing > Event Actions.
2. Select the definition that you want to delete from the Event Actions list.
3. Click Delete.
4. Click Yes to delete the definition, or No to cancel the request.

Configuring event actions for Snort messages

To configure an event action for Snort messages, complete the following steps.
1. From the Identification pane of the Add Event Action dialog box, click Next to advance to the
Brocade Network Advisor SAN User Manual
53-1003154-01
panes of the Add Event Action dialog box.
The Event Actions dialog box displays.
panes of the Add Event Action dialog box.
The Event Actions dialog box displays.
A message displays asking you to confirm the deletion request.
Events pane. See "Creating an event action definition"
on event actions.
The Events pane of the Add Event Action dialog box displays, shown in
Message is the default in the Show list.
Event action definitions
on page 1280 for complete instructions
Figure 559. Snort®
32
1293