JUNOSe 11.0.x Command Reference Guide A to M
mpls rsvp authentication
[ no ] { ip | mpls } rsvp authentication
Syntax
Command introduced before JUNOSe Release 7.1.0.
Release Information
Enables MD5 authentication for RSVP on the interface. Enable authentication after
Description
configuring the authentication key. The router generates an error message and
discards any RSVP messages if you enable authentication before configuring the
authentication key, or remove the key while authentication is still enabled. The no
version disables authentication.
Options
Interface Configuration
Mode
1384
mpls rsvp authentication
ip Specifies alternative keyword for compatibility with non–E Series
implementations
mpls Specifies JUNOSe MPLS implementation
Need help?
Do you have a question about the JUNOSE SOFTWARE 11.0.X - COMMAND REFERENCE A TO M 1-11-2010 and is the answer not in the manual?
Questions and answers