Mpls Topology-Driven-Lsp Ip-Interfaces - Juniper JUNOSE SOFTWARE 11.0.X - COMMAND REFERENCE A TO M 1-11-2010 Command Reference Manual

mpls topology-driven-lsp ip-interfaces

[ no ] mpls topology-driven-lsp ip-interfaces [ egress | ingress ]
Syntax
[ { access-list | prefix-list } listName ] [ host-only ]
no mpls topology-driven-lsp ip-interfaces [ egress | ingress ] [ host-only ]
[ policy-list ]
Command introduced before JUNOSe Release 7.1.0.
Release Information
Specifies LSPs to be put into the IP routing table for forwarding plain IP traffic. The
Description
no version removes the LSPs from the table.
NOTE: This command is deprecated and may be removed completely in a future
release. The function provided by this command has been replaced by the ldp
ip-forwarding command.
Options
Global Configuration
Mode
egress Has no effect
ingress Has no effect
access-list Specifies that listName is an access list
prefix-list Specifies that listName is a prefix list
listName Name of access list or prefix list that specifies LSPs over which IP
interfaces are created
host-only Specifies that only LSPs to host addresses are added to the IP routing
table
policy-list Removes previously applied access lists or prefix lists
Chapter 13: M Commands
mpls topology-driven-lsp ip-interfaces
1403