Mpls Explicit-Path - Juniper JUNOSE SOFTWARE 11.0.X - COMMAND REFERENCE A TO M 1-11-2010 Command Reference Manual

JUNOSe 11.0.x Command Reference Guide A to M

mpls explicit-path

{ ip | mpls } explicit-path { name name | identifier number } [ enable | disable ]
Syntax
no { ip | mpls } explicit-path { name name | identifier number }
Command introduced before JUNOSe Release 7.1.0.
Release Information
Defines an explicit path by name or ID number and also enables or disables the
Description
explicit path. The no version deletes the explicit path.
Options
Global Configuration
Mode
1328
mpls explicit-path
ip Specifies alternative keyword for compatibility with non–E Series
implementations
mpls Specifies JUNOSe MPLS implementation
name Name for the explicit path; string of up to 20 characters
number Number identifying the explicit path in the range 1–65535
enable Reenables the explicit path that was previously disabled on the virtual
router; to prevent a partially configured explicit path from being used, do not
enable it until you have finished configuring or modifying the path
disable Disables the explicit path that was previously enabled on the virtual
router