Mirror - Juniper JUNOSE SOFTWARE 11.0.X - COMMAND REFERENCE A TO M 1-11-2010 Command Reference Manual

JUNOSe 11.0.x Command Reference Guide A to M

mirror

mirror triggerType triggerValue { ip | ipv6 | l2tp } secure-policy-list policyName
Syntax
no mirror triggerType triggerValue { ip | ipv6 | l2tp }
Command introduced before JUNOSe Release 7.1.0.
Release Information
nas-port-id keyword added in JUNOSe Release 7.1.0.
IPv6 support added in JUNOSe Release 10.1.0.
Enables packet mirroring based on the specified trigger and specifies the secure
Description
policy to attach to the subscriber's interface. The no version disables packet mirroring
for the subscriber and removes the trigger configuration.
Options
Global Configuration
Mode
Related Topics
1304
mirror
triggerType One of the following RADIUS attributes
acct-session-id Acct-Session-Id, RADIUS attribute [44]
calling-station-id Calling-Station-Id, RADIUS attribute [31]
ip-address Framed-IP-Address, RADIUS attribute [8]; associated with the
virtual router where the command is issued, RADIUS VSA [26-1]
nas-port-id NAS-Port-Id, RADIUS attribute [87]
username User-Name, RADIUS attribute [1]; associated with the virtual
router where the command is issued, RADIUS VSA [26-1]
triggerValue Value of the triggerType (the specified RADIUS attribute) that
identifies the subscriber
ip Configures mirroring for an IP subscriber
ipv6 Configures mirroring for an IPv6 subscriber
l2tp Configures mirroring for an L2TP subscriber
policyName—Secure policy to attach to the subscriber's interface
Configuring CLI-Based Mirroring