L2Vpn Route-Target - Juniper JUNOSE SOFTWARE 11.0.X - COMMAND REFERENCE A TO M 1-11-2010 Command Reference Manual

JUNOSe 11.0.x Command Reference Guide A to M

l2vpn route-target

[ no ] l2vpn l2VpnName route-target { import | export | both } extendedCommunity
Syntax
Command introduced in JUNOSe Release 8.1.0.
Release Information
Creates or adds to a list of VPWS L2VPN extended communities that the router uses
Description
to determine which routes are imported by the specified VPWS L2VPN instance. The
no version removes a route target from the specified list.
Options
Global Configuration
Mode
Related Topics
1186
l2vpn route-target
l2VpnName Name of the VPWS instance
import Adds the route target to the import list for the specified VPWS instance;
the VPWS accepts only routes that have at least one route target that matches a
route target in the import list
export Adds the route target to the export list for the specified VPWS instance;
all routes advertised from this VPWS are associated with the route targets in the
export list; at least one route target in the export list must match a route target
in the import list of a VPWS L2VPN receiving the route for the route to be
accepted by the VPWS L2VPN.
both Adds the route target to both the import list and export list for the specified
VPWS instance; recommended setting for a VPWS instance
extendedCommunity Two-part number of the format number1:number2 that
identifies an extended community of VPWS L2VPNs where:
number1 AS number or an IP address
number2 Unique integer; 32 bits if number1 is an AS number; 16 bits if
number1 is an IP address
Configuring an L2VPN Instance in the JUNOSe BGP and MPLS Configuration Guide