Mpls Rsvp Signalling Hello Graceful-Restart Recovery-Time - Juniper JUNOSE SOFTWARE 11.0.X - COMMAND REFERENCE A TO M 1-11-2010 Command Reference Manual

JUNOSe 11.0.x Command Reference Guide A to M

mpls rsvp signalling hello graceful-restart recovery-time

{ ip | mpls } rsvp signalling hello graceful-restart recovery-time recoveryTime
Syntax
no { ip | mpls } rsvp signalling hello graceful-restart recovery-time
Command introduced in JUNOSe Release 8.0.0.
Release Information
Configures the recovery time for RSVP-TE graceful restart for all interfaces that have
Description
RSVP-TE enabled. The no version restores the default value.
Options
Global Configuration
Mode
1394
mpls rsvp signalling hello graceful-restart recovery-time
ip Specifies alternative keyword for compatibility with non–E Series
implementations
recoveryTime Time in milliseconds within which you want the neighboring
routers to resynchronize RSVP-TE state and MPLS forwarding state after a graceful
restart, in the range 60000–480000; default value is 120000