Mpls Ldp - Juniper JUNOSE SOFTWARE 11.0.X - COMMAND REFERENCE A TO M 1-11-2010 Command Reference Manual

JUNOSe 11.0.x Command Reference Guide A to M

mpls ldp

[ no ] mpls ldp
Syntax
Command introduced in JUNOSe Release 7.1.0.
Release Information
Enables LDP and topology-driven LSP, as does any LDP-related command, using an
Description
implicit default profile. You cannot enable LDP and topology-driven LSPs on a
loopback interface. The no version disables LDP globally or on the interface.
Global Configuration, Interface Configuration, Subinterface Configuration
Mode
Related Topics
1332
mpls ldp
Configuring MPLS LSPs for L2VPNs and Configuring MPLS LSPs for VPLS in the
JUNOSe BGP and MPLS Configuration Guide