Juniper JUNOS OS 10.3 - SOFTWARE Manual page 1644

Complete Software Guide for Junos
Results
1548
®
OS for EX Series Ethernet Switches, Release 10.3
Configure MSTP on the switch, including the two MSTIs:
4.
[edit protocols]
user@switch2# mstp configuration-name region1
user@switch2# mstp bridge-priority 32k
user@switch2# mstp interface ge-0/0/14.0 cost 1000
user@switch2# mstp interface ge-0/0/14.0 mode point-to-point
user@switch2# mstp interface ge-0/0/18.0 cost 1000
user@switch2# mstp interface ge-0/0/18.0 mode point-to-point
user@switch2# mstp interface all cost 1000
user@switch2# mstp msti 1 bridge-priority 32k
user@switch2# mstp msti 1 vlan [10 20]
user@switch2# mstp msti 2 bridge-priority 4k
user@switch2# mstp msti 2 vlan [30 40]
Check the results of the configuration:
user@switch2> show configuration
interfaces {
ge-0/0/14 {
unit 0 {
family ethernet-switching {
port-mode trunk;
vlan {
members 10;
members 20;
members 30;
members 40;
}
}
}
}
ge-0/0/18 {
unit 0 {
family ethernet-switching {
port-mode trunk;
vlan {
members 10;
members 20;
members 30;
members 40;
}
}
}
}
}
protocols {
mstp {
configuration-name region1;
bridge-priority 32k;
interface ge-0/0/14.0 {
cost 1000;
mode point-to-point;
}
interface ge-0/0/18.0 {
cost 1000;
Copyright © 2010, Juniper Networks, Inc.