RPCD System Messages
RPCD-1001
Message
<timestamp>, [RPCD-1001], <sequence-number>,, WARNING, <system-name>,
Authentication Error: client \"<IP address>\" has bad credentials: <bad user name
and password pair>
Probable Cause
Indicates an authentication error was reported. The specified client IP address has faulty
credentials.
Recommended
Enter the correct user name and password from the Fabric Access API host.
Action
Severity
WARNING
RPCD-1002
Message
<timestamp>, [RPCD-1002], <sequence-number>,, WARNING, <system-name>, Missing
certificate file. Secure RPCd is disabled.
Probable Cause
Indicates an SSL certificate is missing.
Recommended
To enable RPCD in secure mode, install a valid SSL certificate on the switch.
Action
Severity
WARNING
RPCD-1003
Message
<timestamp>, [RPCD-1003], <sequence-number>,, WARNING, <system-name>, Permission
denied accessing certificate file. Secure RPCd is disabled.
Probable Cause
Indicates the SSL certificate file configured on the switch could not be accessed because the root
did not have read-level access.
Recommended
Change the file system access level for the certificate to root read-level access.
Action
Severity
WARNING
Fabric OS Message Reference
53-1001767-01
Chapter
86
495