Brocade Communications Systems 8 Reference page 474

52
ICPD-1005
Recommended Enable the iSNS Client service on a single switch in the fabric using the fosConfig command. Refer
Action to the Fabric OS Command Reference for more information on this command.
Severity WARNING
ICPD-1005
Message
<timestamp>, [ICPD-1005], <sequence-number>,, WARNING, <system-name>, iSCSI
configuration between local switch (<local domain id>) and peer (<peer domain id>)
is out of sync. iSCSI login is not allowed.
Probable Cause Indicates that iSCSI switches in the fabric have different configurations in AUTH, VT, or DD.
Recommended Synchronize the configuration in the fabric using the iscsiCfg command. Refer to the Fabric OS
Action Command Reference for more information on this command.
Severity WARNING
ICPD-1006
Message
<timestamp>, [ICPD-1006], <sequence-number>,, INFO, <system-name>, iSCSI service
<status>
is
Probable Cause Indicates the iSCSI service is enabled or disabled on the switch.
Recommended No action is required.
Action
Severity INFO
ICPD-1007
Message
<timestamp>, [ICPD-1007], <sequence-number>,, INFO, <system-name>, iSNSC service
<status>
is
Probable Cause Indicates the iSNSC service is enabled or disabled on the switch.
Recommended No action is required.
Action
Severity INFO
ICPD-1008
Message
<timestamp>, [ICPD-1008], <sequence-number>,, INFO, <system-name>, iSCSI switch
(<domain id>) is <status>.
Probable Cause Indicates the iSCSI switch is reachable or unreachable.
398
on the switch.
on the switch.
Fabric OS Message Reference
53-1001767-01