Brocade Communications Systems 8 Reference page 726

108
XTUN-1004
Probable Cause Indicates a message transmission failure.
Recommended If there was an unexpected job failure associated with this event, contact your customer support for
Action assistance.
Severity ERROR
XTUN-1004
Message
<timestamp>, [XTUN-1004], <sequence-number>,, ERROR, <system-name>, Exchange
aborted:I/T/L:<FC Initiator ID> <FC Target ID> <FCP Logical Unit Number>.
Probable Cause Indicates that the FCP exchange has been aborted by the Initiator.
Recommended If there was an unexpected job failure associated with this event, contact your customer support for
Action assistance.
Severity ERROR
XTUN-1998
Message
<timestamp>, [XTUN-1998], <sequence-number>,, INFO, <system-name>, FTRACE buffer
<FTRACE Trace Buffer Number> has been cleared.
Probable Cause Indicates that a CLI command caused the trace buffer to be put back into the FTRACE free pool.
Recommended No action is required.
Action
Severity INFO
XTUN-1999
Message
<timestamp>, [XTUN-1999], <sequence-number>,, WARNING, <system-name>, FTRACE
buffer <FTRACE Trace Buffer Number> has been triggered.
Probable Cause Indicates that a programmed trigger event has been detected.
Recommended If there was an unexpected job failure associated with this event, contact your customer support for
Action assistance.
Severity WARNING
XTUN-2000
Message
<timestamp>, [XTUN-2000], <sequence-number>,, INFO, <system-name>, FCIP Tunnel
<Tunnel Number> UP.
Probable Cause Indicates that the specified FCIP tunnel is up.
650 Fabric OS Message Reference
53-1001767-01