Brocade Communications Systems 8 Reference page 391

Fabric os message reference
Hide thumbs Also See for 8:
Table of Contents

Advertisement

Severity
INFO
FW-1194
Message
<timestamp>, [FW-1194], <sequence-number>,, WARNING, <system-name>, <Port Name>,
<Label>, is above high boundary(High=<High value>, Low=<Low value>). Current value
is <Value> <Unit>.
Probable Cause
Indicates that the number of state changes that the port experiences has risen above the high
boundary. The state of the port has changed for one of the following reasons: the port has gone
offline, has come online, is testing, is faulty, has become an E_Port, has become an F_Port, has
segmented, or has become a trunk port.
Recommended
No action is required. Respond to this message as is appropriate to the particular policy of the
Action
end-user installation.
Severity
WARNING
FW-1195
Message
<timestamp>, [FW-1195], <sequence-number>,, INFO, <system-name>, <Port Name>,
<Label>, is between high and low boundaries(High=<High value>, Low=<Low value>).
Current value is <Value> <Unit>.
Probable Cause
Indicates that the number of state changes that the port experiences has changed from a value
outside of the acceptable range to a value within the acceptable range. The state of the port has
changed for one of the following reasons: the port has gone offline, has come online, is testing, is
faulty, has become an E_Port, has become an F_Port, has segmented, or has become a trunk port.
Recommended
No action is required. Respond to this message as is appropriate to the particular policy of the
Action
end-user installation.
Severity
INFO
FW-1196
Message
<timestamp>, [FW-1196], <sequence-number>,, INFO, <system-name>, <Port Name>,
<Label>, value has changed(High=<High value>, Low=<Low value>). Current value is
<Value> <Unit>.
Probable Cause
Indicates that the number of link resets that the port experiences has changed. Link resets occur
due to link timeout errors that indicate no frame activity at all.
Recommended
Check both ends of your cable connection. Verify if the cable and small form-factor pluggables
Action
(SFPs) are faulty.
Severity
INFO
Fabric OS Message Reference
53-1001767-01
42
FW-1194
315

Advertisement

Table of Contents
loading

Table of Contents