Brocade Communications Systems 8 Reference page 413

FW-1376
Message
<timestamp>, [FW-1376], <sequence-number>,, INFO, <system-name>, <Label>, value
has changed(High=<High value>, Low=<Low value>). Current value is <Value> <Unit>.
Probable Cause Indicates that the number of illegal commands has changed. This counter tracks how many times
commands allowed only on the primary fabric configuration server (FCS) switch have been
executed on a non-primary FCS switch. There are many commands that can be executed only on
the primary FCS switch as well as one security command that can be executed only on a backup
FCS switch. The counter increments every time someone issues one of these commands on a
switch where it is not allowed.
Recommended Responses to security-class messages depend on user policies. Consult your security administrator
Action for response strategies and policies.
Severity INFO
FW-1377
Message
<timestamp>, [FW-1377], <sequence-number>,, INFO, <system-name>, <Label>, is
below low boundary(High=<High value>, Low=<Low value>). Current value is <Value>
<Unit>.
Probable Cause Indicates that the number of illegal commands has fallen below the low boundary. This counter
tracks how many times commands allowed only on the primary fabric configuration server (FCS)
switch have been executed on a non-primary FCS switch. There are many commands that can be
executed only on the primary FCS switch as well as one security command that can be executed
only on a backup FCS switch. The counter increments every time someone issues one of these
commands on a switch where it is not allowed.
Recommended No action is required.
Action
Severity INFO
FW-1378
Message
<timestamp>, [FW-1378], <sequence-number>,, WARNING, <system-name>, <Label>, is
above high boundary(High=<High value>, Low=<Low value>). Current value is <Value>
<Unit>.
Probable Cause Indicates that the number of illegal commands has risen above the high boundary. This counter
tracks how many times commands allowed only on the primary fabric configuration server (FCS)
switch have been executed on a non-primary FCS switch. There are many commands that can be
executed only on the primary FCS switch as well as one security command that can be executed
only on a backup FCS switch. The counter increments every time someone issues one of these
commands on a switch where it is not allowed.
Recommended Responses to security-class messages depend on user policies. Consult your security administrator
Action for response strategies and policies.
Fabric OS Message Reference
53-1001767-01
42
FW-1376
337