Brocade Communications Systems 8 Reference page 599

Fabric os message reference

Hide thumbs Also See for 8:

Table of Contents

<timestamp>, [SEC-1092], <sequence-number>,, ERROR, <system-name>, <Policy name>

Name not found.

Probable Cause

Indicates there has been a corruption during the distribution of the security database. This can only

occur when the primary fabric configuration server (FCS) is distributing the security database to the

other switches in the fabric and local validation finds that there is an error in the security database.

This is a rare occurrence.

Run the secFabricShow command to verify that the fabric is still consistent. All the switches should

be in the ready state. If a switch is in the error state, the database might not be correctly updated

for that specific switch.

<timestamp>, [SEC-1093], <sequence-number>,, ERROR, <system-name>, New FCS list

must have at least one member in common with current FCS list.

Probable Cause

Indicates the new fabric configuration server (FCS) list does not have a common member with the

existing FCS list.

Resubmit the command with at least one member of the new FCS list in common with the current

<timestamp>, [SEC-1094], <sequence-number>,, ERROR, <system-name>, Policy member

Probable Cause

Indicates there has been a corruption during the distribution of the security database. This can only

occur when the primary fabric configuration server (FCS) is distributing the security database to the

other switches in the fabric and local validation finds that there is an error in the security database.

This is a rare occurrence.

Run the secFabricShow command to verify that the fabric is still consistent. All the switches should

be in the ready state. If a switch is in the error state, the database might not be correctly updated

for that specific switch.

<timestamp>, [SEC-1095], <sequence-number>,, ERROR, <system-name>, Deleting FCS

policy is not allowed.

Fabric OS Message Reference

53-1001767-01

Chapters

Table of Contents