Brocade Communications Systems 8 Reference page 327

Fabric os message reference

Hide thumbs Also See for 8:

Table of Contents

Probable Cause

Indicates an LRJ received from a device indicates that the CU has lost the logical path to the LPAR.

If this was an unexpected event, contact your vendor's customer support for assistance.

<timestamp>, [FICN-1042], <sequence-number>,, WARNING, <system-name>,

HostTapeIng:FICON Cancel received Path=<VEPortNumber HostDomain HostPort

DeviceDomain> <DevicePort LPAR CUADDR DeviceAddr>state=0x<the current emulation

state for this device>.

Probable Cause

Indicates a job was cancelled during a write pipelining.

If this was an unexpected event (cancel is normally an operator event), contact your vendor's

customer support for assistance.

<timestamp>, [FICN-1043], <sequence-number>,, ERROR, <system-name>,

HostTapeIng::FICON Selective Reset:Path=<VEPortNumber HostDomain HostPort

DeviceDomain> <DevicePort LPAR CUADDR DeviceAddr>state=0x<the current emulation

state for this device> LastCmds=0x<the last 4 commands received from the channel

for this device> LastStatus=0x<the last 4 status values presented to the channel

for this device>.

Probable Cause

Indicates that protocol errors in emulation in the CU or network errors can cause a Selective Reset.

If this was an unexpected event, contact your vendor's customer support for assistance.

<timestamp>, [FICN-1044], <sequence-number>,, ERROR, <system-name>,

HostTapeIng:FICON Selective Reset:Path=<VEPortNumber HostDomain HostPort

DeviceDomain> <DevicePort LPAR CUADDR DeviceAddr>Elapsed Time=<the number of

seconds since the last IO started for this device>.<the number of milliseconds

since the last IO started for this device> seconds.

Probable Cause

Indicates that protocol errors in emulation in the CU or network errors can cause Selective Reset.

If this was an unexpected event, please contact your vendor's customer support for assistance.

Fabric OS Message Reference

53-1001767-01

Chapters

Table of Contents